CH-50052590 - Resharpening of hobs
- Resharpening of hobs in the flute.
- The following operations are available:
- Manual flute
- K-Land along the flute (additional flute operation)
- In order to get a straight rake face on helical hobs a specially calculated and dressed grinding wheel might be needed. The calculation of such a grinding wheel and the dressing is not included in this module.
CH-50052520 - Hob cam grinding
- Cam grinding of hobs.
- The option enables the calculation of the division as a function of the longitudinal flutes and threads, as well as the radial-axial cam grinding path.
- The calculation was based on the grinding wheel being at the center height.
- The suitable wheel profile is calculated with customer-specific software or software from external partners.
- The calculation of this wheel and the dressing is not part of this module.